USER MANUAL Alcatel Logo and Alcatel name are trademarks of Alcatel and used under license by Thomson Telecom. INTRODUCTION Thank you for choosing Versatis P100. Before using this phone, please read the SAFETY INSTRUCTIONS first.
View and Download GE 29320 user manual online. Speakerphone with 10-Number Memory. 29320 Telephone pdf manual download. TION GIVEN BY ATLINKS USA, INC., ITS.
Your phone comes with various features. Please thoroughly read this user manual for all the feature operation and troubleshooting information you need to install and operate your new phone. SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury, including the following: 1. Read and understand all the instructions. Follow all warnings and instructions marked on the product. Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Do not use this product near water (for example, near a bath tub, kitchen sink, swimming pool). Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock.
Unplug this product from the wall outlet under the following conditions: 1) When the power supply cord or plug is damaged or frayed. 2) If the product does not operate normally by following the operating instructions. 3) If the product has been dropped and the cabinet has been damaged. 4) If the product exhibits a distinct change in performance.
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning. Do not use the telephone to report a gas leak in the vicinity of the leak. Use only the supplied NiMH (Nickel Metal Hydride) batteries! The operation periods for the handsets are only applicable with the default battery capacities 10. The use of other battery types or non-rechargeablebatteries/primary cells can be dangerous.
These may cause interference and/or unit damages. The manufacturer will not be held liable for damage arising from such non-compliance. Do not use third party charging bays. The batteries may be damaged. Please note the correct polarity while inserting the batteries. Do not immerse batteries in water, do not place in fire. Battery Safety Precautions.
Do not burn, disassemble, mutilate, or puncture. Like other batteries of this type, toxic materials could be released which can cause injury. To reduce the risk of fire or personal injury, use only the battery listed in User’s Guide. Keep batteries out of children.
Remove batteries if storing over 30 days. CAUTION: Danger of explosion if battery is incorrectly replaced.
Only with GPI or BYD Ni-MHAAA 1.2V/500mAh rechargeable battery or equivalent in the handset. Only use rechargeable batteries with exactly the same specifications as those supplied with the product.
Using non-rechargeableor non-conformingbatteries can damage the product. The batteries could split or leak if incorrectly inserted, opened or exposed to heat. Never dispose of batteries in a fire: the cell could explode. Check with local code for possible special disposal instruction. MAIN FEATURES. FSK/DTMF Caller ID auto detect. Up to 10 records of received Call Log.
Up to 10 records of Phonebook. Up to 5 records of Redial List. Personalized settings for Handset and Base (Ringer, Ringer Volume, Handset Name, etc.). Visual Message Waiting Indicator (Network independent). Alarm. Before you begin Electrical safety 1. Don’t let the base unit or charger gets wet.
Electrical equipment can cause serious injury if used while you are wet or standing in water. If the base unit or charger ever falls into water, don’t retrieve it until you have unplugged the power lead from the mains and the telephone line plug from the telephone socket (base unit only); then pull it out by the unplugged cables. Never use your cordless handset outdoors during a thunderstorm unplug the base unit from the telephone line and the mains socket when there are storms in your area. Damage caused by lightning is not covered by the guarantee. Interference If the sound quality gets worse as you move around while on a call, this is probably caused by interference between the handset and the base unit, perhaps because you are too near to another phone or other electrical equipment.
Move to a different position to clear the interference. If you do not move, your call may be cut off. NOTE: Radio interference in the environment may occasionally cause a short break in the link between the handset and the base unit while you are on a call. The handset’s display will flash briefly, while the unit automatically restores the link. Out of range warning If you hear a warning tone during a call, and the sound in the earpiece becomes faint or distorted, you may be going out of range of the base unit. Move nearer to the base unit within 20 seconds, until the warning tone stops.
Otherwise, your call may be cut off. PARTS CHECKLIST Make sure your package includes the items: Versatis P100 1. 1 Base station 3.
1 AC power adaptor 4. 1 Telephone line cord 5. 2 Rechargeable batteries 1 2 3 4 5 Versatis P100 duo 1. 2 Handsets 2.
1 Base station 3. 1 charger 4. 2 AC power adaptors 5. 1 Telephone line cord 6. 4 Rechargeable batteries 1 2 3 4 5 6 NOTE: If you find any of the parts missing, please contact your local shop where you buy the product. In multi-handsetpacks, you will find one or more additional handsets, chargers with power supply units and additional rechargeable batteries. Telephone Jack Requirements Wall plate To use this phone, you need a RJ11C type modular telephone jack which might look like the one pictured here.If you don’t have a jack, Modular call your local telephone company to find out how to get one installed.
Telephone line jack INSTALLATION AND SETUP CAUTION: Disconnect the phone cord from the wall outlet before installing or replacing the batteries. Never install telephone wiring during lightning storm. Never touch un-insulatedtelephone wires or terminals, unless the telephone line has been disconnected at the network interface. Never install telephone to operate in wet or damp locations. Use only the power pack provided for the base station. Use only the supplied NiMH rechargeable batteries.
Installing and Replacing the Batteries IMPORTANT: If you are not going to use the telephone for more than 30 days, remove the batteries because they may leak and damage the unit. Slide open the battery compartment cover. Place the 2 batteries as indicated. Respect polarity. Slide the battery compartment cover back.
Put the handset on the base and charge for 15 hours first time. A beep indicates that the handset is properly placed on the base or charger. NOTE: Don’t use non-rechargeablebatteries in the handset. They may burst, causing damage. Installing the base station Your phone should be placed on a level surface, such as a desk or table top.
Plug the power supply & line cord into the base station. Plug the power supply & line cord into the wall socket. Always use the cables provided in the box. Installing the charger (Versatis P100 duo) 1.
Plug the power supply into the charger. Plug the power supply into the wall socket. Always use the cables provided in the box. CAUTION: Use only the Thomson Telecom power supply that came with this unit. Using other power supplies may damage the unit. Base and charger adaptor type is S002CV0600030, 100- 240Vac/6Vdc/300mA. KEYS AND DISPLAY Handset Overview.
12 1 2 3 4 5 6 7 9 8 10 11 1. LEFT SOFT KEY (MENU/OK). In idle mode: Press to access the main menu. In sub-menumode: Press to confirm the selection. During a call: Press to access Intercom/ Phonebook/ Redial List/ Call List 2. RIGHT SOFT KEY (CLEAR/BACK/MUTE/INTERCOM). In main menu mode: Press to go back to idle screen.
In sub-menumode: Press to go back to previous level. In sub-menumode: Press and hold to go back to idle screen. In editing / predialing mode: Press to clear a character / digit. In editing / predialing mode: Press and hold to delete all the characters / digits. During a call: Press to mute / unmute the microphone. In idle mode: Press to intercom another handset 3. UP.
In idle mode: Press to access the call list. In menu mode: Press to scroll up the menu items. In Phonebook list / Redial list / Call List: Press to scroll up the list. During a call: Press to increase the volume. In ringing: Press to increase the ringer volume 4. DOWN. In idle mode: Press to access the redial list.
In menu mode: Press to scroll down the menu items. In Phonebook list / Redial list / Call List: Press to scroll down the list. During a call: Press to decrease the volume. In ringing: Press to decrease the ringer volume 5. TALK ON. In idle / predialing mode: Press to make a call. In Redial list / Call List / Phonebook entry: Press to make a call to the selected entry in the list.
During ringing: Press to answer a call 6. TALK OFF. During a call: Press to end a call and go back to idle screen. In menu / editing mode: Press to go back to previous menu. In menu / editing mode: Press and hold to go back to idle screen. In idle mode: Press and hold to power off the handset.
In idle mode (when the handset is powered off): Press and hold to power on the handset 7. ALPHANUMERIC KEYPAD,. (STAR), # (HASH). Press to insert a digit / character /. / #. key in idle mode: Press and hold to enable or disable the keypad lock.
key during a call (in Pulse mode): Press to switch to tone mode. # key in Idle mode: Press and hold to turn on / off the ringer. 0 key in predialing / number editing mode: Press and hold to insert a pause. # key in Call List mode: Press to review caller’s number if applicable 8.
REDIAL LIST. In idle mode: Press to access the redial list 9. PHONEBOOK. In idle mode: Press to access the phonebook list 10. FLASH.
In idle / predialing mode: Press to insert a flash. During a call: Press to dial a flash 11. MICROPHONE 12. EARPIECE Base Station Overview 1. PAGE. Press the Page on the base station to page your handset. It will ring for approximately 60 seconds.
CHARGING CRADLE 2 1 LCD Layout The screen display gives you information on the current status of the telephone. Scroll up / down the menu items / Phonebook list / Redial list / Call List Steady when the handset is in range of the base. Flash when out of range of the base or not registered to the base.
Steady when an intercom is in progress. Flash when there is an incoming internal call.
Indicate a call is in progress. Indicate that the ringer is switched off. Steady when an alarm is set.
Flash when the alarm time set before reaches. Indicate that the keypad is locked. Indicate when there are received new Visual Message Waiting (VMWI) not yet read. Will disappear when all the visual messages have been read.
Indicate when the battery is fully charged. Whole icon flashes when the battery performs initial charging. Internal block icon flashes when the battery is in final charging stage. Indicate when the battery needs charging. Flash when low battery power level is detected. Indicate when more characters are existed before the text currently displayed.
Indicate when more characters are existed after the text currently displayed. Press to select more menu options if applicable Press to confirm the current selection if applicable. Indicate new call in the call list. Press to conduct Intercom call when idle Press to go back to previous menu level or cancel the current action if applicable Press to clear a character or stop the alarm if applicable, press to mute / unmute during a call.
Menu Structure (Handset) In idle mode, press will firstly access the Phonebook menu. Refer to the following for the menu structure. PHONEBOOK View Records ADD Enter the Name Enter the Number Select a Ringer Melody VIEW EDIT DELETE DELETE ALL CONFIRM? CALL LIST View Records ADD TO PB Enter the Name Edit the Number Select a Ringer Melody DELETE DELETE ALL CONFIRM? BS SETTINGS DELETE HS Enter the PIN Select a Handset to Delete DIAL MODE TONE PULSE FLASH TIME SHORT MEDIUM LONG CHANGE PIN Enter the Old PIN Enter the New PIN Enter the New PIN Again ECO MODE ON OFF 4. HS SETTINGS RING SETUP INT RING Select a Ringer Melody EXT RING Select a Ringer Melody RING VOLUME Select a Ringer Volume TONE SETUP KEY TONE ON OFF BATTERY TONE ON OFF OUT OF RANGE ON OFF LANGUAGE ENGLISH /DEUTSCH /FRANCAIS / ITALANO /TURKCE/ESPANOL /E^^HNIKA / NEDERLANDS /POLSKI / RENAME HS Enter the Handset Name HS DISPLAY HANDSET NAME TIME AUTO ANSWER ON OFF DIRECT MEM KEY 1 KEY 2 KEY 3 5. DATE & TIME DATE FORMAT DD - MM - YY MM - DD - YY TIME FORMAT 12 HR 24 HR SET TIME ENTER TIME SET DATE ENTER DATE 6.
ALARM OFF ON ON Set Alarm Time SNOOZE OFF 7. REGISTRATION PIN?
Text and Digit Entry Table The following tables show you where each letter and punctuation character can be found. Respective character table will be used when corresponding menu language is available to select.
This will be helpful when storing a name in the phonebook and renaming your handset. In editing mode, a cursor is displayed to indicate the current text entry position.
It is positioned at the right of the last character entered. WRITING TIPS: Once a character is selected, the cursor will move to the next position after a short pause.
You can move the cursor within the text by to amend the text entry. Press to delete the last character. Press and hold to delete the entire text string. Key Assignment Overview Alphanumeric Editing (For phonebook Number Editing (For Ke y phone number editing, name editing and renaming handset) date/time editing) Key press 1st 2nd 3rd 4th 5th 6th 1 space - 1 1 2 A B C 2 2 3 D E F 3 3 4 G H I 4 4 5 J K L 5 5 6 M N O 6 6 7 P Q R S 7 7 8 T U V 8 8 9 W X Y Z 9 9 0 0 0, P (Pause).? / / ( ). # # ‘ ‘ -.
& # SETTING THE PHONE Date and Time Settings You will need to set the correct time and date so that you know when you received answering machine or call list entries. Change the date format 1. Press and to select DATE & TIME.
Press to select DATE FORMAT. Press to select your desired date format ( DD-MM-YY or MM-DD-YY ). Press to confirm. Change the time format 1. Press and to select DATE & TIME. Press and to select TIME FORMAT. Press to select your desired time format ( 12 HR or 24 HR).
Press to confirm. Set the time 1. Press and to select DATE & TIME.
Press and to select SET TIME. Press to enter the time information. The time entered will be in the format you set in the Change the time format section.
Press to confirm. NOTE: If time has been set before, the current time will display, otherwise, HH:MM will display. Set the date 1. Press and to select DATE & TIME. Press and to select SET DATE. Press to enter the date information. The date entered will be in the format you set in the Change the date format section.
Press to confirm. NOTE: If date has been set before, the current date will display, otherwise, DD- MM-YY will display. Alarm Settings You can use this phone to set an alarm clock.
When an alarm is set, the displays on the screen. When the alarm time is reached, the and ALARM ON flash on the screen ringing with the alarm melody for a duration of 45 seconds. You can press any key to disable the alarm. If snooze function is activated, the alarm will sound again at the end of the snooze period of seven minutes. Key press is still applicable if handset keypad is locked and when the alarm time is reached. The alarm volume level is the same as the settings of the handset ringer volume.
If the handset ringer is set to VOLUME OFF, the alarm still sounds at VOLUME 1 level. During an external call or internal call, if an alarm is set and when the alarm time is reached, the and ALARM ON will still flash. An alarm tone will be emitted from the earpiece to notify user the alarm time is reached. Once user press any key or press and hold to disable the alarm, it will revert to the call duration screen. During paging or ringing, the alarm will not sound when the alarm time is reached.
However, if snooze function is enabled, the alarm will sound again at the end of the snooze period provided that it’s not ringing or in paging mode at the end of the snooze period. Turn on/off the alarm 1. Press and to select ALARM. Press and to select ON/OFF. Press to confirm. NOTE: If ON is selected, you will be asked to set the alarm time. Set the alarm time (if the alarm is set to be ON) 1.
Follow Steps 1 to 3 in Section Turn on/off the alarm. Enter the alarm time. Press to set the snooze function. Press and to select ON or OFF.
Press to confirm. Handset Settings Set the ringer melody for internal calls 1. Press and to select HS SETTINGS. Press to select RING SETUP. Press to select INT RING. Press and to select the desired ringer melody (a total of 5 melodies for your selection) for setting ringer melody for internal calls.
NOTE: The respective ringer melody will be played while browsing the melody list. Press to confirm. Set the ringer melody for external calls 1. Press and to select HS SETTINGS. Press to select RING SETUP. Press and to select EXT RING. Press and to select the desired ringer melody (a total of 5 melodies for your selection) for setting ringer melody for external calls.
NOTE: The respective ringer melody will be played while browsing the melody list. Press to confirm. Set the ringer volume for external calls 1. Press and to select HS SETTINGS.
Press to select RING SETUP. Press and to select RING VOLUME. Press and to select the desired ringer volume (a total of 6 ringer volume levels including VOLUME OFF). NOTE: The respective ringer volume will be played during your selection.
If VOLUME OFF is selected, icon will display. Press to confirm. Set alert tones A single beep is emitted when you press a key. You can turn on or off the key tone. You can also turn on the alert tones when low battery and out of range are detected. Low battery tone will be emitted while you are talking with the phone to alert you that you need to charge up your battery. Press and to select HS SETTINGS.
Press and to select TONE SETUP. Press and to select KEY TONE / BATTERY TONE / OUT OF RANGE. Press and to turn on or off these tones. Press to confirm. Set the handset language 1.
Press and to select HS SETTINGS. Press and to select LANGUAGE. Press and to select the desired language. Press to confirm.
Rename the handset 1. Press and to select HS SETTINGS.
Press and to select RENAME HS. Press and enter the name of your handset.
Press to confirm. Choose the information to be displayed in idle You can choose to display time or handset name in your idle screen. Press and to select HS SETTINGS. Press and to select HS DISPLAY. Press and to select HANDSET NAME or TIME. Press to confirm. Set the auto answer If you turn on the Auto Answer, you can pick up the call from the cradle without pressing any key.
Press and to select HS SETTINGS. Press and to select AUTO ANSWER. Press and to turn on or off the auto answer feature. Press to confirm.
Store direct memory access number You can store three direct access numbers into digit KEY 1, KEY 2 and KEY 3, which will be convenient for you to dial to these numbers directly. Press and to select HS SETTINGS. Press and to select DIRECT MEM.
Press and to select any one from KEY 1, KEY 2 and KEY 3. Press and then enter the number you would like to store, or edit the number existed before. Press to confirm. Base Settings The current settings are marked an asterisk which is displayed at the rightmost of the menu item. De-registera handset You are requested to enter the 4-digitPIN in order to de-registera handset from the base station. The antenna icon on the de-registeredhandset will blink.
NOTE: You cannot de-registerthe handset that you are currently using. Press and to select BS SETTINGS. Press to select DELETE HS. Press and you are requested to enter the 4-digitsystem PIN. Enter the 4-digitsystem PIN. Press and a list of registered handsets is displayed 6.
Press to select one of the handsets that you want to deregister. Press to confirm. Change the dial mode 1.
Press and to select BS SETTINGS. Press and to select DIAL MODE. Press and to select TONE or PULSE.
Press to confirm. Change the flash time The flash time setting is country dependent. Please contact your local service provider for the correct settings. Press and to select BS SETTINGS. Press and to select FLASH TIME.
Press and to select your desired flash time ( SHORT, MEDIUM, LONG). Press to confirm.
Change the system PIN code A 4-digitsystem PIN code is used for changing the system settings of the base station. It is used to protect your phone against unauthorized use. The default system PIN code is 0000. Press and to select BS SETTINGS. Press and to select CHANGE PIN. Press and you are requested to enter the 4-digitsystem PIN. Enter the old system PIN.
Press and enter the new system PIN. Press and enter the new system PIN again. NOTE: If the new PIN entered in Step 6 is not matched with the new system PIN entered in Step 5, user is requested to enter the valid system PIN again in Step 5. Press to confirm. Change the ECO mode 1. Press and to select BS SETTINGS.
Press and to select ECO MODE. Press to select ON or OFF. Press to confirm. Registration Your handset(s) and base station is(are) pre-registered.Up to five handsets can be registered to a single base station. If for some reason, the handset is not registered to the base station ( flashes even when the handset is near the base station), register your handset according to the following procedure.
Press and hold on the base station for about five seconds, the base station is entered into registration mode. Press and to select REGISTRATION. Press and you are requested to enter the 4-digitsystem PIN. Enter the 4-digitsystem PIN.
Press to confirm. If the handset registration is successful, you will hear a confirmation tone and the will stop flashing. The handset will automatically be allocated the next available handset number.
This handset number is shown in the handset display in standby mode. If the handset registration is.
RIGHT SOFT KEY will display NOT POSSIBLE. Intercom another handset 1. In idle mode, press and the registered handsets will display except the calling handset. Enter the desired handset number to intercom with. The called handset rings and press on the called handset to establish the internal call. NOTE: If two handsets are registered to the base station, press will connect to another handset immediately.
Call all handsets 1. In idle mode, press and the registered handsets will display.
Press to ring to all registered handsets. Transfer an external call to another handset During an external call: 1. Press and to select INTERCOM. Press to select the desired handset to intercom with. The external call is put on hold automatically and the called handset rings.
Press on the called handset to establish an internal call. Press on the calling handset or put the calling handset on the charging cradle to end the current call with the external party. The external call is transferred to the called handset. Make a 3-wayconference call The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.
During an external call: 1. Follow Steps 1 to 4 in section Transfer an External Call to Another Handset. Press and hold on the calling handset to establish the conference call. Any handset hangs up during a conference call will leave the other handset still in connection with the external call. PHONE OPERATION Make a Call Preparatory dialing Enter the phone number and press to dial the number. Press to clear the entry. Direct Dialing Press to take the line and enter the phone number.
Call from Direct Memory In idle, press and hold // to dial the number stored. OR Press and then press and hold // to dial the number stored. If there is no number stored, unit will emit double beep tones. Call from the Phonebook Press to access the phonebook and press to select the desired phonebook entry. Press to dial out to the selected phonebook entry.
Alternatively, press to access the phonebook to get the desired phonebook entry. Call from the Call List Press to access the Call L ist and press to select the desired Call List entry. Press to dial out to the selected Call List entry. Alternatively, press to access the Call List from the main menu. Call from the Redial list Press or to access the redial list and press to select the desired redial number. Press to dial out to the selected redial number.
Call Timer Your handset automatically times the duration of every call. The call timer will display a few seconds after the call has made. It is shown in hours, minutes and seconds format (HH:MM:SS). Answer a call If the handset is not on the charging cradle: When the phone rings, press to answer a call. If the handset is on the charging cradle or the base station and if AUTO ANSWER is set to ON: When the phone rings, pick up the handset to answer a call. End a call During a call connection, press to end the call. OR Put the handset on the base station to end the call.
Adjust earpiece volume There are 5 levels (VOLUME 1 to VOLUME 5) to choose from for each of earpiece volume. During a call: Press to select volume 1-5.The current setting is shown. When you end the call, the setting will remain at the last selected level. Mute a call You can talk to someone nearby without letting the caller hear you during a call. During a call: Press to mute the microphone and MUTED will display on the screen. Your caller cannot hear you. Press again to unmute the microphone.
Set the silent mode In idle, press and hold to turn off the handset ringer. The is displayed on the screen. Turn on the keypad lock In idle, press and hold key to turn on the keypad lock. The is displayed on the screen. Redial the last number You can redial up to 5 of the last numbers called. If you have stored a name in the phonebook to go with the number, the name will be displayed instead.
![Atlinks Ex29398-b Manual Atlinks Ex29398-b Manual](https://ds04.infourok.ru/uploads/ex/1121/000abf80-2030e2f4/img7.jpg)
The most recent last number will display at the top of the redial list. Redial a Number from the Redial List 1. In idle mode, press to access the redial list. Remarks: If redial entry with name, press to view the number.
Press to access the redial list. Press to browse the redial list. Press to dial to the selected redial number. NOTE: If there are no numbers in the redial list, the display shows EMPTY.
Store a Redial Number into the Phonebook 1. Follow Steps 1 and 2 in the Redial a Number from the Redial List section.
Press to select ADD TO PB. Press to enter the name. Press to store the redial number into the phonebook. Press to select phonebook melody.
Press to browse the melody list. The respective melody will be played when browsing the melody list. Press to confirm. Delete a Redial Number 1.
Follow Steps 1 and 2 in the Redial a Number from the Redial List section. Press and to select DELETE. Press to confirm. Delete the Entire Redial List 1.
Follow Steps 1 and 2 in the Redial a Number from the Redial List section. Press and to select DELETE ALL. Press to confirm. Press to confirm again. Find the Handset You can locate the handset by pressing on the base station.
All the handsets registered to the base will produce the paging tone and PAGING is displayed on the screen. You can stop the paging by pressing / / on any handset or on the base again. NOTE: If there is an incoming call during paging, the phone will ring with the incoming call instead of paging. Make an Internal Call This feature is only applicable when there are at least two registered handsets. It allows you to make internal calls, transfer external calls from one handset to another handset and make conference calls. If the calling is not answered within 60 seconds, the called handset will stop ringing and the calling handset will return to standby mode. NOTE: If only one handset is registered to the base station, press.
PRIVATE PHONEBOOK Your phone can store up to 10 private phonebook entries with names and numbers. Each phonebook entry can have a maximum of 20 digits for the phone number and 12 characters for the name. You can also select different ringtones for your phonebook entries. Phonebook entries are stored alphabetically by name. Add a new phonebook entry In idle: 1. Press to access the phonebook. OR Press to select PHONEBOOK main menu item and then press to access the phonebook.
Press to select ADD. Press to enter the name. Press to enter the number.
Press and to select the desired ringtone for your phonebook entry. Press to store the phonebook entry. Search a phonebook entry In idle: 1.
Press to access the phonebook. Enter the first character of the name by multi-tap. View a phonebook entry In idle: 1. Press to access the phonebook. Press to select the desired phonebook entry. Press and to select VIEW. Press and to review the name, number and melody of the selected phonebook entry.
NOTE: If number is more than 12 digits, press or to view the remaining digits. Edit a phonebook entry In idle: 1.
Press to access the phonebook. Press to select the desired phonebook entry. Press and to select EDIT. Press and the current contents of the selected phonebook entry displays. Edit the name and press.
Edit the number and press 7. Press to select the ringtone and press to confirm. Delete a phonebook entry In idle: 1. Press to access the phonebook. Press to select the desired phonebook entry. Press and to select DELETE. Press to confirm.
Delete the entire private phonebook 1. Press to access the phonebook. Press and to select DELETE ALL. Press to confirm. Press to re-confirm.
Check the phonebook usage You can check how many phonebook entries have been occupied in your phone and how many phonebook entries are available for you to store in the phonebook. Press to access the phonebook. Press and to select PB STATUS. Press to confirm and X/10 USED will display on the screen. NOTE: X denotes the current number of stored entries, while 10 denotes the capacity of phonebook memory. CALLER DISPLAY (NETWORK DEPENDENT) This feature is available if you have subscribed the Caller Line Identification service with your network service provider.
Your phone can store up to 10 received calls with date/time information in the Call List. The number will be shown on the screen when the phone is ringing. If the number matches with one of the entries in your Private Phonebook, the caller’s name stored in the private phonebook will be displayed alternatively with the number. The handset will ring with the melody associated with that phonebook entry. If the caller number is disabled to send caller information, WITHHELD will display.
If the caller number is not provided, UNAVAILABLE will display. In standby, if three unanswered calls are received, 3 NEW CALLS will be displayed. View the call list All received calls are saved in Call List with the latest call putting at the top of the list. When the call list is full, the oldest call will be replaced by a new call. The unanswered call which has not been read is marked with a at the centre of the bottom line of the display. Press to access the call list.
OR Press and to select CALL LIST. Press to select the desired entry. Press to view the caller’s number if applicable.
![Atlinks Ex29398-b Manual Atlinks Ex29398-b Manual](http://image.slidesharecdn.com/comodoantivirusforwindows10-150824091104-lva1-app6892/95/to-protect-windows-10-download-comodo-antivirus-4-638.jpg)
Store a call list number into the phonebook 1. Follow Steps 1 and 2 in Section View the call list. Press to select ADD TO PB. Press to enter the name. Press and the selected call list number is displayed. Edit the number if necessary.
Press and to select the melody. Press to confirm. Delete an entry in the call list 1.
Follow Steps 1 and 2 in Section View the call list. Press and to select DELETE. Press to confirm. Delete the entire list of the call list 1. Follow Steps 1 and 2 in Section View the call list.
Press and to select DELETE ALL. Press to confirm. Press to re-confirm.
View the Details of the Call List Entry 1. Follow Steps 1 and 2 in Section View the call list. Press and to select DETAILS. Press to display the date and time of the selected call list entry. Press to go back to previous screen. Voice Mail (Network Dependent) This feature is available if you have subscribed to the voicemail service from you network service provider.
You can press and hold to dial out to the voice mail number directly to listen to your voice mail messages. Access voice mail messages. Will display and the VMWI entry is stored in the Call List when you have new message in your voice mailbox. Press and to select CALL LIST. OR Press in idle to access the call list. Press to select the desired VMWI entry. Press to dial out to the voice mail server.
NOTE: If a more recent VMWI entry is received from the same network server number of an existing VMWI entry, the new VMWI will not be stored but the date/time of the VMWI will be updated on the existing VMWI entry. After you have accessed to all new voice mail messages, VMWI will turn off automatically. When the call list is full, the new VMWI entry will replace the oldest non-VMWIentry in the call list. Delete VMWI entries To delete a single VMWI entry from the call list: 1. Press and to select CALL LIST. OR Press in idle to access the call list. Press to select the desired VMWI entry.
Press and to select DELETE. Press to confirm. To delete all VMWI entries from the call list: 1. Press and to select CALL LIST. OR Press in idle to access the call list. Press and hold to delete all VMWI entries.
The will disappear. NOTE: If you choose DELETE ALL function in the call list, the handset will also delete all VMWI entries and CID entries. TROUBLESHOOTING No dialing tone when pressing key 1.
Check the connections. Unplug and plug back in the mains. Check that the telephone line cord has been plugged into the base station and the phone socket. Move the cordless handset closer to the telephone base. It might be out of range.
Wait until the line is unoccupied. Use the original telephone line cord.
Disconnect the telephone base from the telephone jack and connect a different telephone. If there is no dial tone on that telephone either, the problem is your wiring or local service. Contact your local telephone service provider. My telephone does not ring when there is an incoming call 1. Make sure the ringer is on.
Make sure the telephone line cord and power adapter are plugged in properly. The cordless handset maybe too far from the telephone base. Move it closer to the telephone base.
Re-installthe battery and place the cordless handset in the telephone base or charger. SEARCHING is displayed Reduce the range. Connect base station to mains. Caller ID features are not working properly 1. Caller ID is a subscription service. You mush subscribe to this service from your telephone service provider for this feature to work on your telephone. The caller may not be calling from an area which supports Caller ID.
No display Recharge battery. This telephone is not equipped with a grounding function. Therefore some of the functions may be limited when used in PBX systems. General Product Care To keep your telephone working and looking good, follow these guidelines:.
Avoid putting the phone near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps ). DO NOT expose to direct sunlight or moisture. Avoid dropping the unit and other rough treatment. Clean with a soft cloth. Never use a strong cleaning agent or abrasive powder because this will damage the finish. Retain the original packaging in case you need to ship the phone at a later date. Periodically clean the charge contacts on the handset and base with a soft cloth.
Environment Used equipment must be disposed of in compliance with current environmental protection regulations. You should return it to your reseller or dispose of it in an approved recycling centre. “WEEE” Weight: 0.32kg Do not attempt to open the batteries, as they contain chemical substances.
In the event of leakage, avoid contact with the skin, eyes and mouth. In the event of contact, rinse the affected part for several minutes in running water.
Clean the product with absorbent paper or a dry cloth and contact your reseller for replacement batteries. Model Versatis P15 (Rev 1, E) 09-20 Printed in China.